How to select the in-line speed sensor
For the specific measurement work of the sensor, the principle of the sensor must be considered first. Because, even if it is measuring the same object, there are sensors with multiple principles to choose from. Which type of sensor is more suitable depends on the characteristics of the detected and the use conditions of the sensor: sensor installation size; detection method; detection object ; Use environment; use temperature; working voltage, etc.
Our company's in-line sensors are named after the installation length. The installation lengths are divided into 35mm, 39.5mm, 45mm, 50.3mm. At present, our standard gear has two types: A-type gear thickness ≥ 10mm, tooth width 2mm. The thickness of Type B gear is ≥10mm, and the tooth width is 1.43mm. The sensor can be customized to detect tooth width 2mm, 1.43mm two kinds, the gear material is silicon steel sheet or die-cast iron.
Type A gear, tooth width 2mm, customized sensor
The installation distance of the sensor: 0.8mm±0.2mm. Sensor output standard waveform: 90º±20º.
Type B gear, tooth width 1.43mm, customized sensor
The installation distance of the sensor: 0.6mm±0.15mm. Sensor output standard waveform: 90º±20º.
For the gear width of 2mm, a 2mm sensor is required;
For the gear width of 1.43mm, a 1.43mm sensor is required.
Shenzhen Huaxia Magnetic Electronic Technology Development Co., Ltd. specializes in the production and sales of customized asynchronous motor speed encoders, asynchronous motor speed sensors, angle sensors, gearbox sensors, engine sensors, AC asynchronous motor encoders, automotive speed sensors, industrial control speed measurement Sensors and other special motor products, industry-leading brands, high quality, welcome to consult and order: 0755-29810687.